Active loop amplifier, in constant current technology with dynamic compressor for setting up an inductive sound reproduction system in rooms up to 200 m2. Inductive transmission of audio signals allows users of hearing aids with a T-coil or inductive receivers, e.g. the LR-200, to receive audio signals. Wireless transmission is an advantage of inductive sound reproduction systems which makes it possible for the user to move freely within the loop. Inductive sound reproduction systems are used for various applications, e.g. as a hearing aid for the hearing impaired in churches, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With inductive sound reproduction systems, an inductive loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the inductive receiver. In the receivers, this voltage is then converted again into an audio signal.
- Dynamic compressor
- Automatic talkover
- Metal loss correction 0-(+3) dB/oct.
- Phantom power can be switched on additionally
- 482 mm (19") rack installation with supplied mounting brackets
|Loop current||7 A (peak)|
|Loop resistance||0.2-2 Ω|
|Room size||up to 200 m2|
|mic 1.6 mV/2.6 kΩ, combo, bal.
line 630 mV/6.5 kΩ, combo, bal.
line 630 mV/9 kΩ, RCA, unbal.
alarm: 2 screw terminals
for connecting a switch
|Outputs||loop: 2 screw terminals|
|±8 dB, 100 Hz|
|±10 dB, 10 kHz|
|Frequency range||50-7,500 Hz, ±3 dB|
|Admiss. ambient temp.||0-40 °C|
|Power supply||˜ 230 V/50 Hz/150 VA|
|Dimensions||482x88x280 mm, 2 RS|